Universal Upper Link Mount - 2 Hole Adjustable FLAT 5/8" bolt 2" spread

These are designed as a weld-on flat mount, so no bending needed — you just cut them, weld them to your frame, and bolt your link in. They run a 5/8" bolt on a 2" spread.

You've got options — these are set up for a 5/8" bolt at 2" spread and work with rod ends, uni-ball bearings, or even bushing setups. Just match your link hardware to that bolt size and spacing.

The description doesn't lock in a specific thickness, so that comes down to your build and loads — shoot us an email if you want a recommendation for what to run them on your plasma or waterjet. They include overlays for longevity, so you can stack plate to beef them up.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The Universal Upper Link Mount - 2 Hole Adjustable FLAT 5/8" bolt 2" spread is $12.00.

This Universal Upper Link Mount - 2 Hole Adjustable FLAT 5/8" bolt 2" spread is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Upper link Chassis mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Upper link Chassis mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Link Suspension Components, including Upper link Chassis mounts, all designed by working fab shops. Browse the Link Suspension Components section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.