Universal Lower Link Mount 5/8" bolt on 3"-3 1/16" spread from Tekk

They're designed to be cut from mild steel and MIG welded, but you can also run them in 4130 Chromoly and TIG weld them for race applications. The DXF is the same either way, just pick your material when you have them cut.

Both work. These are built for standard link arms running either bushing assemblies or uni-ball bearing chassis pivots, as long as the pivot uses a 5/8" bolt and a 3" to 3 1/16" spread.

These are weld-in mounts. They're designed to be MIG welded for mild steel builds, or TIG welded if you cut them from Chromoly for a race setup.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The Universal Lower Link Mount 5/8" bolt on 3"-3 1/16" spread from Tekk is $16.00.

This Universal Lower Link Mount 5/8" bolt on 3"-3 1/16" spread from Tekk is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Lower Link Arm Mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Lower Link Arm Mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Mounts and Accessories, including Lower Link Arm Mounts, all designed by working fab shops. Browse the Mounts and Accessories section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.