Universal Lower Link Mounts 3" spread 3/4" Bolt from Tekk
More Information
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Universal / platform-agnostic |
|---|---|
| Part Family | Link Pockets / Chassis Link Mounts (frame-rail) |
| Position | Lower (lower control arm / lower link mount) |
| Build System | Link suspension (general rod-end / uniball link) |
Frequently Asked Questions
The description doesn't call out a specific thickness, so it's up to your build and link load. Shoot us an email if you want a recommendation for your setup and we'll point you in the right direction.
These are made to weld onto the side of your stock frame rail for mounting the lower links. The bolt sits perfectly perpendicular to the frame so there's no kick to deal with.
Yep, after payment you get the DXF cut files to run on your plasma, laser, or waterjet. They're set up for a 3" spread on a 3/4" bolt, so just cut, fit, and weld them in.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Universal Lower Link Mounts 3" spread 3/4" Bolt from Tekk is $12.00.
This Universal Lower Link Mounts 3" spread 3/4" Bolt from Tekk is brought to you by Tekk. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Mounts and Accessories plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Mounts and Accessories category, or shoot us an email and we will point you to the right files for your build.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
Reviews
No reviews yet.
