PME Midboard Micro Stub Rear Suspension Bulkheads from JEHC INC

These come in 4 trackwidths measured at the wheel mount surface — 66", 69", 71.5", and 74" — and three arm lengths of 28", 32", and 36". Just let us know which combo you want for your buggy build.

Yep, these rear setups are built specifically around the PME mid-board micro stub packages from Kartek — the PMERH5205MBMS930 series including the 930, 9306P, 930SC, 934, 934SC, 9346P, and 934AT6V kits. You'll want one of those stub kits to run these.

These are downloadable cut files — after payment you get the DXFs to run on your plasma, laser, or waterjet, then weld into your chassis. Nothing physical ships. If you need a shop to cut them, email us and we can point you to one.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The PME Midboard Micro Stub Rear Suspension Bulkheads from JEHC INC is $600.00.

This PME Midboard Micro Stub Rear Suspension Bulkheads from JEHC INC is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Tube Chassis Buggies and Components plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Tube Chassis Buggies and Components category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Race/Play Chassis Components, including Tube Chassis Buggies and Components, all designed by working fab shops. Browse the Race/Play Chassis Components section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.