5/8 BOLT LOWER LINK POCKET - PLASMA TABLE FRIENDLY

These are Plasma Table Friendly, so they're designed with little to no bends — mostly or all flat plate. Just cut them on your plasma table and weld them up with a MIG, but follow the WPO steps so you keep the strength in the component.

These are designed for a 5/8" bolt and a 3" to 3.0625" spread on 5/8" bolt spacers, so they'll cover a range of link arm setups. If your setup runs different spacing, email us and we'll see if another file works for your build.

This is a digital download, so you're getting the DXF cut files (or CAD solids) for the link pockets. You take those and have them cut on a CNC plasma, laser, or waterjet, then weld them into your build — nothing physical ships.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 5/8 BOLT LOWER LINK POCKET - PLASMA TABLE FRIENDLY is $16.00.

This 5/8 BOLT LOWER LINK POCKET - PLASMA TABLE FRIENDLY is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Lower Link Mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Lower Link Mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Link Suspension Components, including Lower Link Mounts, all designed by working fab shops. Browse the Link Suspension Components section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.