2021 CanAm X3 "Smart-Shox" Rear Arm Scan CAD FILE
2021 CanAm X3 XRS Rear Arm Scan
This 3D scan data pack was put together by the guys at JEHC, and features the Scan Mesh file in a STEP file format along with critical geometry blocks allowing you to easily pull center points and relevant data for design.
Frequently Asked Questions
This one's scan data, not a cut file — you get the scan mesh in STEP format plus critical geometry blocks so you can pull center points and reference geometry for your own design. It's meant for designing a part off the factory arm, not running straight on a plasma table.
This pack is scanned off the 2021 X3 XRS Smart-Shox rear arm, so that's what it's confirmed for. If you're working with a different X3 setup, shoot us an email and we'll see if there's another scan that matches your build.
It comes as a STEP file for the scan mesh along with the geometry blocks, so any CAD program that reads STEP will open it up. From there you can pull your center points and relevant data to design your part.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 2021 CanAm X3 "Smart-Shox" Rear Arm Scan CAD FILE is $200.00.
This 2021 CanAm X3 "Smart-Shox" Rear Arm Scan CAD FILE is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for 2018-21 CanAm X3 XRS plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2018-21 CanAm X3 XRS category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including 2018-21 CanAm X3 XRS, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.