2018 CanAm X3 XRS Lower Arm Scan

This one's scan data, not a cut-ready DXF. You get the scan mesh in STEP format plus critical geometry blocks so you can pull center points and key data to design your own arm off the factory geometry.

It comes as a STEP file for the scan mesh, plus the geometry blocks for pulling reference points. STEP imports into pretty much any CAD program, so you should be good to design from it.

This scan is off a 2018 X3 XRS lower arm, and it lives in the 2018-21 X3 XRS category. If you're on a different year and want to confirm the geometry carries over, shoot us an email and we'll help you sort it out.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 2018 CanAm X3 XRS Lower Arm Scan is $75.00.

This 2018 CanAm X3 XRS Lower Arm Scan is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 2018-21 CanAm X3 XRS plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2018-21 CanAm X3 XRS category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including 2018-21 CanAm X3 XRS, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.