2021 CanAm X3 "Smart-Shox" Upper Arm Scan CAD FILE

It's a 3D scan data pack, not a cut file — you get the scan mesh in STEP format plus critical geometry blocks so you can pull center points and relevant data for your own design work.

Yep, this scan was put together off a 2021 CanAm X3 XRS upper arm with the Smart-Shox setup. If you're running a different year or trim, shoot us an email and we'll see what scan data we've got that matches your build.

Any CAD program that reads STEP files will open it, and the geometry blocks are built right in so you can grab center points and key dimensions for design. If you want to take it from scan to finished part, we can connect you with a designer for custom work.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 2021 CanAm X3 "Smart-Shox" Upper Arm Scan CAD FILE is $150.00.

This 2021 CanAm X3 "Smart-Shox" Upper Arm Scan CAD FILE is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 2018-21 CanAm X3 XRS plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2018-21 CanAm X3 XRS category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including 2018-21 CanAm X3 XRS, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.