101-JLF-101-16-44.5

$2.00

In stock

SKU

101-JLF-101-16-44.5

More Information

More Information
Seller	Jason Heard

Specifications

Platform	Universal / platform-agnostic
Part Family	Weld Washers (round + teardrop, weld-in bung)

Frequently Asked Questions

Are these DXF files ready to run on my plasma table as-is, or do I need to clean them up first?

These come as DXF cut files designed by a pro fab shop, so you can drop them on your plasma, laser, or waterjet and cut. If you run into any issues with the file on your table, shoot us an email and we'll get it sorted.

Do these parts need to be bent after cutting or do they weld in flat?

We don't have the bend details listed here for this one, so email us and we'll confirm whether it's a flat weld-in part or needs bending before you cut. If it does need bending, we can also point you to a shop that can cut and bend it for you.

What thickness steel should I cut these from?

The recommended material thickness isn't spelled out on this listing, so reach out by email and we'll check with the designer on what they spec'd these for. We can also recommend a shop to have them cut if you don't run your own table.

How do I get the 101-JLF-101-16-44.5 after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the 101-JLF-101-16-44.5 cost?

The 101-JLF-101-16-44.5 is $2.00.

Who designs the 101-JLF-101-16-44.5?

This 101-JLF-101-16-44.5 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.