TRIANGULATED LOWER 45* LINK PIVOT - 2" ROUND TUBE - 9/16" HOLE

$18.00

In stock

SKU

604-JLF-168

These triangulated lower link mounts are PTF and feature no bends. Using 3/16" material for the plates and overlays, these files are fabrication-friendly and coped to seamlessly mount to round tubing. Designed by JEHC

***These products are Digital Assets. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***

Plasma Table Friendly – This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.

Frequently Asked Questions

What size tube are these coped to fit, and how thick should I cut the plates?

These are coped to mount to 2" round tube, and the plates and overlays are designed to be cut from 3/16" material. They're PTF (plasma table friendly) with no bends, so you can run them flat on your table.

Are these set up for a 1.25" rod end, and what hole size do they come with?

Yep, these are 1.25" rod end horizontal triangulated link mounts and the files come with a 9/16" hole. If you need a different hole size for your build, shoot us an email and we'll see what we can do.

Do these need to be bent or are they all flat plate I can just weld in?

All flat plate, no bends on these — that's what PTF means. Just have them cut on your plasma, laser, or waterjet, then follow the WPO when you assemble and weld them in so you keep the strength right.

How do I get the TRIANGULATED LOWER 45* LINK PIVOT - 2" ROUND TUBE - 9/16" HOLE after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the TRIANGULATED LOWER 45* LINK PIVOT - 2" ROUND TUBE - 9/16" HOLE cost?

The TRIANGULATED LOWER 45* LINK PIVOT - 2" ROUND TUBE - 9/16" HOLE is $18.00.

Who designs the TRIANGULATED LOWER 45* LINK PIVOT - 2" ROUND TUBE - 9/16" HOLE?

This TRIANGULATED LOWER 45* LINK PIVOT - 2" ROUND TUBE - 9/16" HOLE is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Where can I get cut files for 1.25" Rod End Horizontal Triangulated Link Mounts - PTF?

DIY Off Road has downloadable DXF cut files for 1.25" Rod End Horizontal Triangulated Link Mounts - PTF plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 1.25" Rod End Horizontal Triangulated Link Mounts - PTF category, or shoot us an email and we will point you to the right files for your build.

Do you have Tube Chassis Link Mounts cut files for an off-road or race build?

Yeah — DIY Off Road carries downloadable DXF cut files across Tube Chassis Link Mounts, including 1.25" Rod End Horizontal Triangulated Link Mounts - PTF, all designed by working fab shops. Browse the Tube Chassis Link Mounts section or email us and we will help you track down the right files.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.