Universal FLAT link Mount 5/8" bolt on 2.75" Spread

These are flat link mounts, so the DXF cuts flat and you just weld them in as-is, no bending needed. Run them on your plasma, laser, or waterjet and you're good to go.

Yep, this mount is set up for any pivot, rod end or bushing, that uses a 5/8" bolt with a 2.75" spread. As long as your hardware matches that, you're set.

The file doesn't lock you into a thickness, so cut them from whatever plate suits your link loads and build. If you want a recommendation on material or a shop to run them, just email us and we'll point you in the right direction.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The Universal FLAT link Mount 5/8" bolt on 2.75" Spread is $10.00.

The Universal FLAT link Mount 5/8" bolt on 2.75" Spread is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Upper link Chassis mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Upper link Chassis mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Link Suspension Components, including Upper link Chassis mounts, all designed by working fab shops. Browse the Link Suspension Components section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.