16" Race Sway Bar

These plates are designed to be cut and then bent on a press, so you'll need a way to bend them after running the DXF on your plasma, laser, or waterjet. If you don't have a press, email us and we can recommend a shop to cut and bend them for you.

Yep, this is a digital download only. You're getting the DXF cut files so you can have the plates cut and bent yourself or send them out to a shop, nothing physical ships.

The files are the cut geometry for the arms, but we don't list a specific material spec here. Email us and we'll get you in touch with Tekk so they can tell you what thickness they ran these at for a race sway bar setup.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 16" Race Sway Bar is $23.00.

This 16" Race Sway Bar is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Light and Simple Race Sway Bar Arms From Tekk plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Light and Simple Race Sway Bar Arms From Tekk category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including Light and Simple Race Sway Bar Arms From Tekk, all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.