Stage 2 SwingSet Steering Y Frame Assembly
This Y-Frame assembly comes in a variety of options (see below) and is designed to be cut from 4130 Chromoly and TIG welded, although some have MIG welded them in the past.
***This product is a Digital Asset, you are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
***Due to the complexity of these assemblies a representative from JEH Consulting LLC will be reaching out to you personally upon purchase***
The Stage 2 Y-Frame is the perfect starting point for your next tube chassis project. From race trucks to luxury prerunners the JEHC Platforms are designed to be fabrication friendly, taking the guess work out of complex suspension setup and geometry.
Stage 2 refers to the style of the components in this assembly, everything in this Y-Frame Package is designed to be cut from 4130 Chromoly and TIG welded, some have MIG welded them. These components are lighter and stronger than Stage 1 components.
All of the Arms, Uprights, and Bulkhead is designed with fixtures (included) so that you can fabricate everything professionally from the start.
***Available in Either 3 or 4 link setups
This Y-Frame includes the following: Front suspension, Bulkhead, Floor section, Rear pivot boxes, Rear Links, Rear Housing with Tabs.
This Y frame is offered in several different options, After the consultation with Tekk the guys there will organize all your files and send them over, or send them directly to a laser house on your behalf.
Standard Trackwidth Options: Fullsize 91-93” range, Midsize 88-90” range, and Narrow 84-86”.
The Trackwidth numbers are starting points with narrow hubs and smaller offset wheels There are quite a few variables with this so trackwidths can vary. With standard Race 2.5” Hubs and TT style wheels/tires these setups are about 1.5” wider on the low end making them about 92.5”, 89.5”, and 85.5” range.
Wheel Travel FRONT – Fullsize 24” Usable, Midsize 22” Usable, and Narrow 20” Usable.
Wheel Travel REAR – Fullsize 32” Usable, Midsize 29” Usable, and Narrow 26” Usable.
Standard Wheelbase Options (choose one): 125”, 127”, 129”, 132”, 134”, 138”, 142” or 145” (unique and custom options are available)
Rear Housing Options – 4” or 3.5” DIY housing from JEHC but most standard housings will work from Camburg, Tubeworks, ID, BMS, Currie, and many others.
Rear Link Arm Options – Either Standard Boxed or Clevis Link Arms.
Steering Setup – This Bulkhead is designed for swingset steering, the swingers are lasercut with some machiend parts for the pivots. The steering box is from Power Steering Solutions and the ram is from PSS, the 2" diameter.
(Custom options are Available, please contact [email protected] )
Hubs and Brakes – This platform utilizes standard 12 bolt faceplates for a variety of bolt on hub options from standard 2.5” up to TT assemblies, for the rear that is determined by the housing tube diameter.
The width of the floor will be drawn to your specific CAB / application, that will be addressed during the JEHC Consultation.
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Tube-chassis / roll cage (generic round-tube build) |
|---|---|
| Part Family | Y-Frame / H-Frame / Roller Chassis / Center Assemblies |
| Build System | Stage 1 / Stage 2 / Stage 3 complexity tier |
Frequently Asked Questions
Yeah, this assembly is designed to be cut from 4130 chromoly and TIG welded. Some guys have MIG welded them in the past, but TIG is what it's built for.
You're buying the digital DXF cutting files for the assembly, not a physical part. You take those and have the plates cut and press-bent on a CNC plasma, laser, or waterjet, then weld it up yourself.
You do. These assemblies are complex, so a rep from JEH Consulting LLC reaches out to you personally after you buy to help you through it.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Stage 2 SwingSet Steering Y Frame Assembly is $7,000.00.
This Stage 2 SwingSet Steering Y Frame Assembly is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Complete Y-Frame Chassis Assemblies plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Complete Y-Frame Chassis Assemblies category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Race/Play Chassis Components, including Complete Y-Frame Chassis Assemblies, all designed by working fab shops. Browse the Race/Play Chassis Components section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
