Stage 1 Y Frame Assembly from JEHC
This Bulkhead is designed to be fabrication friendly, cut from mild steel and MIG welded its the easiest bulkhead to fabricate from JEHC. All of the Stage 1 components are designed to be plasma table friendly, meaning they can be cut on a plasma table and they feature little to no bending/forming at all.
Options and specifications are below.
***This product is a Digital Asset, you are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
***Due to the complexity of these assemblies a representative from JEHC will be reaching out to you personally upon purchase***
The Stage 1 Y-Frame is the perfect starting point for your next tube chassis project. From race trucks to luxury pre-runners the JEHC Platforms are designed to be fabrication friendly, taking the guess work out of complex suspension setup and geometry. All of the Stage 1 components are designed to be plasma table friendly, meaning they can be cut on a plasma table and they feature little to no bending/forming at all.
Stage 1 refers to the style of the components in this assembly, everything in this Y-Frame Package can be cut from Mild Steel and MIG welded. Some clients cut them from 4130 Chromoly and TIG weld them but Stage 1 Components are designed to complement MIG welding.
All of the Arms, Uprights, and Bulkhead is designed in a simple “snap together” fashion for a very fabrication friendly setup.
This Y-Frame includes the following: Front suspension, Bulkhead, Floor section, Rear pivot boxes, Rear Links, Rear Housing with Tabs.
This Y frame is offered in several different options, After the consultation with Tekk the guys there will organize all your files and send them over, or send them directly to a laser house on your behalf.
Standard Trackwidth Options: Fullsize 91-93” range, Midsize 88-90” range, and Narrow 84-86”.
The Trackwidth numbers are starting points with narrow hubs and smaller offset wheels There are quite a few variables with this so trackwidths can vary. With standard Race 2.5” Hubs and TT style wheels/tires these setups are about 1.5” wider on the low end making them about 92.5”, 89.5”, and 85.5” range.
Wheel Travel FRONT – Fullsize 24” Usable, Midsize 22” Usable, and Narrow 20” Usable.
Wheel Travel REAR – Fullsize 32” Usable, Midsize 29” Usable, and Narrow 26” Usable.
Standard Wheelbase Options (choose one): 125”, 127”, 129”, 132”, 134”, 138”, 142” or 145” (unique and custom wheelbase options are available as well)
Rear Housing Options – 4” or 3.5” DIY housing from JEHC, will also work with other fabricated housings such as Camburg, BMS, and Currie.
Rear 4 Link – Plasma Table Friendly Link Arm Cutfiles.
(optional 3-link available, ask JEHC about this)
Steering Setup – Designed around the Power STeering Solutions Racks
(Custom options are Available, please contact JEHC)
Hubs and Brakes – This platfrom utilizes standard 12 bolt faceplates for a variety of bolt on hub options from standard 2.5” up to TT assemblies, for the rear that is determined by the housing tube diameter.
The width of the floor will be drawn to your specifc CAB / application, that will be addressed during the JEHC Consultation.
Login and Registration Form