Stage 1 AWD Y-Frame Platform

$3,600.00
In stock
SKU
S1-AWD-YFRAME

This Bulkhead is designed to be fabrication friendly, cut from mild steel and MIG welded its the easiest bulkhead to fabricate from JEH Consulting LLC. All of the Stage 1 components are designed to be plasma table friendly, meaning they can be cut on a plasma table and they feature little to no bending/forming at all. 

Options and specifications are below.

***This product is a Digital Asset, you are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***

***Due to the complexity of these assemblies a representative from JEH Consulting LLC will be reaching out to you personally upon purchase***

The Stage 1 Y-Frame is the perfect starting point for your next tube chassis project. From race trucks to luxury pre-runners the JEHC Platforms are designed to be fabrication friendly, taking the guess work out of complex suspension setup and geometry. All of the Stage 1 components are designed to be plasma table friendly, meaning they can be cut on a plasma table and they feature little to no bending/forming at all. 
 
Stage 1 refers to the style of the components in this assembly, everything in this Y-Frame Package can be cut from Mild Steel and MIG welded. Some clients cut them from 4130 Chromoly and TIG weld them but Stage 1 Components are designed for more MIG welding.

All of the Arms, Uprights, and Bulkhead is designed in a simple “snap together” fashion for a very fabrication friendly setup.

 This Y-Frame includes the following: Front suspension, Bulkhead, Floor section, Rear pivot boxes, Rear Links, Rear Housing with Tabs. 

This Y frame is offered in several different options, After the consultation with JEHC the guys there will organize all your files and send them over, or send them directly to a laser house on your behalf.

Standard Trackwidth Options: Fullsize 91-93” range, Midsize 88-90” range

Wheel Travel FRONT – Fullsize 22” Usable, Midsize 20” Usable

Wheel Travel REAR – Fullsize 32” Usable, Midsize 29” Usable (other options are available based on the rear link arms utilized for the platform)
 
Standard Wheelbase Options (choose one): 125”, 127”, 129”, 132”, 134”, 138”, 142” or 145” (unique and custom wheelbase options are available as well)

Rear Housing – Setup for Spidertrax but other options are available upon request.

Rear 4 Link – Plasma Table Friendly Link Arm Cutfiles.
 
Steering Setup – This Bulkhead is designed for a Power Steering Solutions 2.75 Rack

Hubs and Brakes – This platform utilizes Spidertrax Front hubs and brakes, ideally the rear should as well or other options are possible.

The width of the floor will be drawn to your specific CAB / application, that will be addressed during the JEHC Consultation.

Write Your Own Review
You're reviewing:Stage 1 AWD Y-Frame Platform
Your Rating
Copyright © 2021 DIY Offroad, Inc. All rights reserved.