4 Link Mount 5/8" Bolt on 2.75" spacer spread for JEHC Housing

These are designed specifically to locate onto the JEHC fabricated housings (604-JEH-001 and 604-JEH-003). If you're running a different housing, email us and we'll see if another file works for your setup.

Yep, this is a digital download — after payment you get the DXF cut files to run on your plasma, laser, or waterjet. Nothing physical ships, you cut and weld them in yourself.

These mounts locate the upper links with 5/8" bolts on a 2.75" spacer spread. If you need a different spread or bolt size, reach out and we can connect you with the designer for custom work.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 4 Link Mount 5/8" Bolt on 2.75" spacer spread for JEHC Housing is $12.00.

This 4 Link Mount 5/8" Bolt on 2.75" spacer spread for JEHC Housing is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 3.5" Desert Racing Fabricated Housings and Components from Tekk plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 3.5" Desert Racing Fabricated Housings and Components from Tekk category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Fabricated Housings from JEHC INC, including 3.5" Desert Racing Fabricated Housings and Components from Tekk, all designed by working fab shops. Browse the Fabricated Housings from JEHC INC section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.