3.5" Tube Lower Link Mounts (Front of Housing)

Be the first to review this product

$9.00

In stock

SKU

604-JEH-010

Lower Link mounts designed for mounting lower link arms in front of the rear end housing for a 3/4″ bolt and 3″ spread on the spacers (will work with narrower spread spacers). These Mounts are Plasma Table Friendly, easy to fabricate.

***This product is a Digital Asset, you are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***

Plasma Table Friendly - This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.

Details

***This product is a Digital Asset, you are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***

More Information

More Information
Seller	TEKK Consulting

Specifications

Platform	Aftermarket fab housings (Spidertrax / Trail-Gear / Camburg / Currie F9)
Part Family	Upper / Lower Link Mounts (housing-mounted)
Position	Under-housing vs front-of-housing (lower link mount)
Build System	Plasma Table Friendly (PTF) flat-plate, no-bend

Frequently Asked Questions

Do these link mounts need to be bent or are they flat plate I can just run on my plasma table?

These are plasma table friendly, so it's all flat plate with no bends needed. Just cut the DXF on your plasma, laser, or waterjet and you're good to go for assembly.

What bolt size and spacer spread are these set up for?

They're designed for a 3/4" bolt with a 3" spread on the spacers, and they'll also work fine if you run a narrower spread spacer.

Anything special I need to do when welding these in so they hold up on a desert build?

Yep, there are specific steps to follow (per the WPO) to keep the strength in the component, so make sure you follow that process when you fabricate and weld these in.

How do I get the 3.5" Tube Lower Link Mounts (Front of Housing) after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the 3.5" Tube Lower Link Mounts (Front of Housing) cost?

The 3.5" Tube Lower Link Mounts (Front of Housing) is $9.00.

Who designs the 3.5" Tube Lower Link Mounts (Front of Housing)?

This 3.5" Tube Lower Link Mounts (Front of Housing) is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Where can I get cut files for 3.5" Desert Racing Fabricated Housings and Components from Tekk?

DIY Off Road has downloadable DXF cut files for 3.5" Desert Racing Fabricated Housings and Components from Tekk plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 3.5" Desert Racing Fabricated Housings and Components from Tekk category, or shoot us an email and we will point you to the right files for your build.

Do you have Fabricated Housings from JEHC INC cut files for an off-road or race build?

Yeah — DIY Off Road carries downloadable DXF cut files across Fabricated Housings from JEHC INC, including 3.5" Desert Racing Fabricated Housings and Components from Tekk, all designed by working fab shops. Browse the Fabricated Housings from JEHC INC section or email us and we will help you track down the right files.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.