3.5" Housing 4130 Billet Lower Link Mount Pair
Shipping available to U.S. addresses only.
Details
These lower link mounts are designed for pre-runner/race trucks with 1.25" rod ends and 3/4" bolt spacers that are 3”-3.065" in width. They are sold in a set with 4 billet 4130 mounts and 4130 plates for boxing in the mount to the housing tube. They can be mounted under the housing or in front of the housing for various applications. This is a physical product; you will be shipped the link mounts in a USPS flat rate box.
Shipping available to U.S. addresses only.
More Information
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Universal / platform-agnostic |
|---|---|
| Part Family | Billet Axle Lower Link Mounts (weld-on housing) |
| Position | Lower (lower control arm / lower link mount) |
| Build System | Mild-steel MIG vs 4130 chromoly TIG |
Frequently Asked Questions
Yep, these are made for a 3.5" housing so they should saddle right up to it without any extra work. They ship as a pair ready to weld onto your housing.
These are billet 4130, so they weld in fine for a link setup. They show up as a physical pair ready to fab onto your housing.
Right now shipping is only available to U.S. addresses. If you're outside the U.S., shoot us an email and we'll see what we can work out.
The 3.5" Housing 4130 Billet Lower Link Mount Pair is $250.00.
This 3.5" Housing 4130 Billet Lower Link Mount Pair is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Billet 4130 Link Mount Tabs from JEHC INC plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Billet 4130 Link Mount Tabs from JEHC INC category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including Billet 4130 Link Mount Tabs from JEHC INC, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
Reviews
No reviews yet.
