3/4" ON 3.06" SPREAD 1.25" ROD END PACK (RH)

You get two Precision Series 1.25" right hand rod ends, four 1" to 3/4" stainless spacers on 3.06" spread, two 4130 threaded bungs, and two 1.25" jam nuts. It ships to you as a complete kit ready to weld in.

The 4130 bungs are made for 2" by 0.25" wall tube, but they'll also work for 1.75" by .120 wall. So you've got a little flexibility depending on what you're running on your build.

Yeah, these are built to DIY specs and made to mate up with a bunch of the cutfile packs here, from the Centermount front ends to the I-Beam bulkheads. If you're not sure it pairs with your specific setup, shoot us an email and we'll point you the right way.

The 3/4" ON 3.06" SPREAD 1.25" ROD END PACK (RH) is $125.00.

The 3/4" ON 3.06" SPREAD 1.25" ROD END PACK (RH) is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Bearing Packs plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Bearing Packs category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including Bearing Packs, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.