2020 RZR Pro XP Rear ARM
2020 RZR Pro XP Rear Arm
This 3D scan data pack was put together by the guys at JEHC, and features the Scan Mesh file in a STEP file format along with critical geometry blocks allowing you to easily pull center points and relevant data for design.
Frequently Asked Questions
This one's a 3D scan data pack, not a cut file — you get the scan mesh in STEP format plus the geometry blocks for pulling center points and key data. It's meant for designing your own arm off the factory geometry, not running straight on a plasma table.
You get the scan mesh file in STEP format along with critical geometry blocks so you can easily pull center points and relevant data while you design. Basically everything you need to build off the factory geometry.
This scan data is for the 2020 RZR Pro XP rear arm. If you're working on a different model, shoot us an email and we'll see if we've got scan data that fits your build.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 2020 RZR Pro XP Rear ARM is $165.00.
The 2020 RZR Pro XP Rear ARM is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for 2020 RZR Pro XP plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2020 RZR Pro XP category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including 2020 RZR Pro XP, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.