2019 RZR 1000 Turbo Lower Arm Scan

This one's a 3D scan pack, not a ready-to-cut DXF. You get the scan mesh in STEP format plus critical geometry blocks so you can pull center points and design your own parts off it.

It comes as a STEP file of the scan mesh along with geometry blocks for grabbing center points and relevant data. Most CAD programs will open a STEP no problem so you can design off the lower arm geometry.

This pack is the scan off a 2019 RZR XP1000 Turbo lower arm, so that's what it's confirmed for. If you're working on a different year, shoot us an email and we'll see if we've got scan data that lines up with your build.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 2019 RZR 1000 Turbo Lower Arm Scan is $75.00.

This 2019 RZR 1000 Turbo Lower Arm Scan is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 2019 Rzr XP1000 Turbo plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2019 Rzr XP1000 Turbo category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including 2019 Rzr XP1000 Turbo, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.