2020 RZR Pro XP Front Lower Arm

This one is a 3D scan data pack, not a ready-to-cut DXF — you get the scan mesh in STEP format plus geometry blocks so you can pull center points and build your own design off the real arm. If you want help turning it into something cut-ready, hit us up and we can connect you with a designer.

Any CAD program that reads STEP files will open it — pretty much all the major ones do. From there you can use the included geometry blocks to grab the critical center points for your build.

It's scanned off a 2020 Pro XP, so that's what we can confirm it matches. If you're on a different year, email us and we'll see if the geometry lines up for your build before you buy.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 2020 RZR Pro XP Front Lower Arm is $85.00.

The 2020 RZR Pro XP Front Lower Arm is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 2020 RZR Pro XP plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2020 RZR Pro XP category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including 2020 RZR Pro XP, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.