17" T4 Sway Bar Arm

These are designed to be cut from 4130 chromoly and TIG welded together. The files are set up for that material, so cut your plates from 4130 and weld them up for a light, strong arm.

There's a press bend involved — the description notes these plates are meant to be cut and bent (press) before welding. Have them cut on a plasma, laser, or waterjet, then press the bends and TIG it all together.

You're buying the digital DXF cutting files, not a physical part. Run them on your own plasma/laser/waterjet or send them out to get the plates cut, then bend and weld them into your build. If you need a shop to cut them, email us and we'll point you to a recommendation.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 17" T4 Sway Bar Arm is $72.00.

This 17" T4 Sway Bar Arm is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for T4 Trophy Truck Style RACE Sway Bar Arms plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the T4 Trophy Truck Style RACE Sway Bar Arms category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including T4 Trophy Truck Style RACE Sway Bar Arms, all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.