1.25" 48 Spline Billet 4130 Sway Bar Ends (PAIR)
These Machined Sway bar ends are the perfect complement to a fabricated sway bar arm, machined from 4130 and precision broached for the sway bar of your choice these are designed for abuse. The dual bolt clamp ensures that the arm stays located on the bar even in extreme conditions and flex that vehicles like trophy trucks see. All of the sway bar ends like this one are broached for Swayaway Sway Bars, for information on order a sway bar please contact [email protected] and they will get you situated. Each sway bar end kit comes with two 4130 machined sway bar ends with four 12 point bolts and washers. Enough for one set of fabricated sway bar arms.
Shipping available to U.S. addresses only.
More Information
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Trophy Truck / Trick Truck (TT) |
|---|---|
| Part Family | Machined Sway Bar Ends (splined/broached) |
| Build System | Mild-steel MIG vs 4130 chromoly TIG |
Frequently Asked Questions
These are broached for Swayaway sway bars with a 1.25" 48 spline, so they're made to match that setup. If you need help getting the right bar to go with them, shoot an email to [email protected] and they'll get you sorted.
Yep, each kit comes with two machined 4130 sway bar ends plus four 12-point bolts and washers — that's enough for one full set of fabricated sway bar arms.
They use a dual bolt clamp design specifically so the arm stays located on the bar even in extreme conditions and flex like a trophy truck sees. They're machined from 4130 and built to take abuse.
The 1.25" 48 Spline Billet 4130 Sway Bar Ends (PAIR) is $300.00.
This 1.25" 48 Spline Billet 4130 Sway Bar Ends (PAIR) is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Machined 4130 Sway Bar Ends plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Machined 4130 Sway Bar Ends category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including Machined 4130 Sway Bar Ends, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
Reviews
No reviews yet.
