1500 Silverado 99-13 Rear Offset Spring Hangers - Plasma Table Friendly

Be the first to review this product

$18.00

In stock

SKU

603-JEH-020

Rear Spring Hangers designed for optimal geometry, the same as the Original GMT800 offset hangers from the GMR back in the day, modified to be Plasma Table Friendly. These hangers lower the shackle location and move it back in the chassis, perfect for 7-7.5" length shackles. Weld them up and bolt them into the stock location for serious performance with any 2.5" bolt in spring pack for the 1500 Silverado 99-13 platform.

***This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***

Plasma Table Friendly - This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.

More Information

More Information
Seller	Jason Heard

Specifications

Platform	Chevy/GMC Silverado/Sierra 1500 GMT800 (99-06)
Part Family	Leaf Spring Hangers
Position	Rear suspension
Build System	Plasma Table Friendly (PTF) flat-plate, no-bend

Frequently Asked Questions

Do these bolt into the stock location or do I need to cut the frame?

They bolt right into the stock hanger location after you weld them up. You build the hanger from the cut plates, then bolt it in where the factory one sat.

Will these work with my 2.5" wide leaf pack and what shackle length do I need?

Yep, they're made for any 2.5" bolt-in spring pack on the 99-13 1500 Silverado. They lower and move the shackle back, so they're dialed in for 7-7.5" shackles.

Are these flat plate so I can run them on my plasma table, or do they need bending?

These are Plasma Table Friendly, meaning all flat plate with no bends, so they cut easy on a plasma, laser, or waterjet. Just follow the included WPO during assembly to keep the strength right, since you're welding the hanger up yourself.

How do I get the 1500 Silverado 99-13 Rear Offset Spring Hangers - Plasma Table Friendly after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the 1500 Silverado 99-13 Rear Offset Spring Hangers - Plasma Table Friendly cost?

The 1500 Silverado 99-13 Rear Offset Spring Hangers - Plasma Table Friendly is $18.00.

Who designs the 1500 Silverado 99-13 Rear Offset Spring Hangers - Plasma Table Friendly?

This 1500 Silverado 99-13 Rear Offset Spring Hangers - Plasma Table Friendly is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Where can I get cut files for Leaf Spring Hangers?

DIY Off Road has downloadable DXF cut files for Leaf Spring Hangers plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Leaf Spring Hangers category, or shoot us an email and we will point you to the right files for your build.

Do you have Leaf Spring Components cut files for an off-road or race build?

Yeah — DIY Off Road carries downloadable DXF cut files across Leaf Spring Components, including Leaf Spring Hangers, all designed by working fab shops. Browse the Leaf Spring Components section or email us and we will help you track down the right files.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.