105-JLF-001-2.0-5.5-70

Are these notch guides sized for 2.0" round tube, or will they work on other diameters too?

These are made for 2.0" round tubing, so they're matched to that OD. If you're running a different size tube, shoot us an email and we'll see if there's another guide file that fits your build.

Is this a 3D print file I run on my own printer, or do I get a DXF for my plasma table?

This one lives in the 3D printed notch guide category, so it's a downloadable file you print yourself, not a DXF for cutting. After payment you get the file to load up and print at home or send out.

What's the notch angle and length these are set up for?

The guide is for 2.0" round tube, and the file is dialed in to a specific notch setup — check the part number details on this page for the exact geometry. If you need a different angle or length, email us and we can connect you with the designer for a custom file.

How do I get the 105-JLF-001-2.0-5.5-70 after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the 105-JLF-001-2.0-5.5-70 cost?

The 105-JLF-001-2.0-5.5-70 is $4.00.

Who designs the 105-JLF-001-2.0-5.5-70?

This 105-JLF-001-2.0-5.5-70 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Where can I get cut files for 2.0" Round Tubing?

DIY Off Road has downloadable DXF cut files for 2.0" Round Tubing plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 2.0" Round Tubing category, or shoot us an email and we will point you to the right files for your build.

Do you have 3D Printed "Potato Chip" Notch Guides cut files for an off-road or race build?

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Printed "Potato Chip" Notch Guides, including 2.0" Round Tubing, all designed by working fab shops. Browse the 3D Printed "Potato Chip" Notch Guides section or email us and we will help you track down the right files.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.

105-JLF-001-2.0-5.5-70

Frequently Asked Questions