Universal Tube BUMBER FRAME HORN 48DEG
| Seller | JEH Consulting INC |
|---|
Frequently Asked Questions
These are designed universal, so they're a starting point for just about any prerunner bumper build. You trim your factory frame back to where you want the bumper and index off the main 2" tube location to set everything up.
They're built around a 2" tube as the main location reference. Typically you bend up a 2" tube as the starting point for the bumper and it indexes right into these fabricated horns.
Yep, these are downloadable DXF cut files you can run on your plasma, laser, or waterjet, then weld up into the frame horns. After that you trim your frame and build the bumper from there — if you need a shop to cut or bend, email us for a recommendation.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Universal Tube BUMBER FRAME HORN 48DEG is $9.00.
This Universal Tube BUMBER FRAME HORN 48DEG is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Tube Bumper Frame Horns plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Tube Bumper Frame Horns category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Bumpers, Frame Horns, and Body Mounts, including Tube Bumper Frame Horns, all designed by working fab shops. Browse the Bumpers, Frame Horns, and Body Mounts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.