105-JLF-001-1.75-5.5-75

$4.00

In stock

More Information

More Information
Seller	Jason Heard

Specifications

Platform	Universal / platform-agnostic
Part Family	Tube Notch / Coping Guides (3D-printed potato-chip)

Frequently Asked Questions

Are these notch guides made for 1.75" round tube, or will they work on other tube sizes too?

These are set up specifically for 1.75" round tubing, so they'll match that OD. If you're running a different tube size, shoot us an email and we'll see if there's another guide file that fits your build.

Are these actual 3D print files I run on my printer, or DXF cut files?

These potato chip notch guides are 3D print files, not DXFs — you print them yourself and use them to mark and guide your tube notches. After payment you'll get the downloadable file to send to your printer.

What's the 5.5 and 75 in the name, and do these cover different notch angles?

This one is the specific config listed in the title for your 1.75" tube — if you need a different angle or setup, check the other guides in this category or email us and we'll point you to the right file for your chassis.

How do I get the 105-JLF-001-1.75-5.5-75 after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the 105-JLF-001-1.75-5.5-75 cost?

The 105-JLF-001-1.75-5.5-75 is $4.00.

Who designs the 105-JLF-001-1.75-5.5-75?

This 105-JLF-001-1.75-5.5-75 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Where can I get cut files for 1.75" Round Tubing?

DIY Off Road has downloadable DXF cut files for 1.75" Round Tubing plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 1.75" Round Tubing category, or shoot us an email and we will point you to the right files for your build.

Do you have 3D Printed "Potato Chip" Notch Guides cut files for an off-road or race build?

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Printed "Potato Chip" Notch Guides, including 1.75" Round Tubing, all designed by working fab shops. Browse the 3D Printed "Potato Chip" Notch Guides section or email us and we will help you track down the right files.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.