Universal Upper Link Mount - 2 holes Adjustable 15 Deg. 5/8" bolt 2" spread

The files don't lock you into a specific thickness, so cut them from whatever plate suits your link loads. A lot of guys run these out of 3/16" or 1/4" for a solid weld-on mount, but match it to your build and link size.

These are a weld-on design meant to mount your upper link straight to the frame or chassis. They've got overlays built in for longevity, so just cut them, fit them up, and weld them in.

They're set up for a 5/8" bolt on a 2" spread, so you can run rod ends, uni-ball bearings, or even a bushing setup as long as it fits that spacing. Pretty flexible on what you bolt into them.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The Universal Upper Link Mount - 2 holes Adjustable 15 Deg. 5/8" bolt 2" spread is $12.00.

The Universal Upper Link Mount - 2 holes Adjustable 15 Deg. 5/8" bolt 2" spread is offered through the DIY Off Road marketplace, featuring cut-file designs from fabricators including All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Upper link Chassis mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Upper link Chassis mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Link Suspension Components, including Upper link Chassis mounts, all designed by working fab shops. Browse the Link Suspension Components section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.