Tekk Standard 22" Sway Bar

We don't have a thickness called out in the file itself, so shoot us an email and we'll get you the recommended material spec for this sway bar before you run them on your table.

These get press bent after cutting, so you'll want to cut them on your plasma, laser, or waterjet first and then bend them. If you need a shop to handle the cutting and bending, email us and we'll point you to one we trust.

Yep, this is a digital download — you're getting the DXF cut files for the sway bar plates, nothing physical ships. You take those files, have them cut and bent, then weld up your sway bar from there.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The Tekk Standard 22" Sway Bar is $9.00.

This Tekk Standard 22" Sway Bar is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Plasma Table Friendly Fabricated Sway Bar Arms from Tekk. plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Plasma Table Friendly Fabricated Sway Bar Arms from Tekk. category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including Plasma Table Friendly Fabricated Sway Bar Arms from Tekk., all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.