13" Race Sway Bar

These are flat DXF cut files that get cut on a plasma, laser, or waterjet and then pressed/bent into shape before welding. If you don't have a press, email us and we can recommend a shop to cut and bend them for you.

We don't spec a set thickness in the file itself since it depends on your build, so go with what makes sense for your sway bar setup and loads. If you're unsure, shoot us an email and we'll connect you with the designer to dial it in.

Yep, this is a digital download, so after payment you get the DXF cut files to take straight to your CNC plasma, laser, or waterjet. Nothing physical ships, just the files.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 13" Race Sway Bar is $23.00.

This 13" Race Sway Bar is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Light and Simple Race Sway Bar Arms From Tekk plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Light and Simple Race Sway Bar Arms From Tekk category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including Light and Simple Race Sway Bar Arms From Tekk, all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.