IRC Front Trophy Truck 6 on 6.5 Hub Assemblies
These Hub assemblies are designed for the standard Trophy Truck or Prerunner applicaiton, this is the IRC equilivant to the industry standard 2.5" bearing front hub assemblies.
-Twelve RPI 11/16 wheel studs with 5/8 threads.
-Four 60mm Tapered Roller Bearings with matching seals that are more robust dynamically and radially than the standard 2.5" bearings used in off-road racing.
-Two300M bolt in snouts for 12 bolt standard D44 style pattern (DIY snout blocks)
-Two 4140 Internal Bearing crush sleeve.
-Two 7075 Hub bodys and matching caps with O rings.
-Two IRC lock nuts, Left and Right hand thread with 4130 locking plates.
-Setup for 14" by 1.25" rotors (sold seperately)
-Features a 5" center bore for wheels.
Shipping is not included in product cost. Shipping is an additional cost calculated based on location and product weight / dimensions. Local pickup available in Murrieta, CA.
For shipping cost estimate, please email [email protected]
Frequently Asked Questions
Yeah, these are designed for both standard Trophy Truck and Prerunner applications. They're the IRC equivalent to the industry standard 2.5" bearing front hub assemblies most guys are already running.
Rotors are sold separately. These are set up for 14" by 1.25" rotors, so just make sure whatever you run matches that and the 12 bolt standard D44 style pattern on the snouts.
Shipping isn't included and gets calculated by location and weight/dimensions, so email [email protected] for an estimate. Local pickup is also available in Murrieta, CA if that's easier for you.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The IRC Front Trophy Truck 6 on 6.5 Hub Assemblies is $5,200.00.
This IRC Front Trophy Truck 6 on 6.5 Hub Assemblies is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for IRC Inc Hub and Rear End Components plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the IRC Inc Hub and Rear End Components category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including IRC Inc Hub and Rear End Components, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.