Ford 9" Center Section with Housing Mock up Parts
This Scan and Data pack is the perfect start to designing your own Ford 9" fabricated housings! It features a 9" through bolt case scan with a 9" gear set and 40 spline spool backed with a faceplate / mock tube centerline so that you know exactly where to start.
This 3D scan data pack was put together by the guys at JEHC, and features the Scan Mesh file in a STEP file format along with critical geometry blocks allowing you to easily pull center points and relevant data for design.
Frequently Asked Questions
This one's a 3D scan and data pack, not a cut file — you get the scan mesh in STEP format plus geometry blocks so you can pull center points and start designing your own fabricated 9" housing. It's meant as your starting reference, not a part to run on the plasma table.
You get a scan of a 9" through-bolt case with a 9" gear set and 40 spline spool, backed with a faceplate and mock tube centerline, all in a STEP file. It also includes critical geometry blocks so you can grab the relevant center points and data for your design.
Yep, that's exactly what it's for — it gives you the case scan and centerline references so you know where to start laying out your own fabricated 9" housing. If you need custom design help dialing it in for your build, shoot us an email and we can connect you with the designers.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Ford 9" Center Section with Housing Mock up Parts is $200.00.
This Ford 9" Center Section with Housing Mock up Parts is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Driveline Component 3D Scans plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Driveline Component 3D Scans category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across 3D Scan CAD Files, including Driveline Component 3D Scans, all designed by working fab shops. Browse the 3D Scan CAD Files section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.