3.25" Tube Housing Lower Link Mount

These are cut for a 3.25" diameter housing tube and work on both stock and fabricated housings at that size. If your tube is a different diameter, shoot us an email and we'll see if we've got a file that matches your housing.

They're designed for a 3/4" bolt with a 3" spread on the link arm. Just make sure that matches your link ends before you run them.

This is a straight 0 deg. mount that works both under and in front of the housing, so you've got options on how you set up your lower links. Once you buy you get the DXF files to have cut on a plasma, laser, or waterjet and then press bent before you weld them in.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 3.25" Tube Housing Lower Link Mount is $9.00.

This 3.25" Tube Housing Lower Link Mount is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Straight (0 Deg.) "Front Mount" Lower Link Mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Straight (0 Deg.) "Front Mount" Lower Link Mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Lower Link Arm Housing Mounts, including Straight (0 Deg.) "Front Mount" Lower Link Mounts, all designed by working fab shops. Browse the Lower Link Arm Housing Mounts section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.