Details
Designed for 2" hollow snout and Wilwood brakes. This item was designed to be cut out of 4130 chromoly steel.
More Information
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Sand truck / buggy / sandcar (Class 1 / Class 10 / Sandrail) |
|---|---|
| Part Family | Spindles / Uprights (beam, buggy, GM hub) |
| Build System | Class-based race spec (Class 1 / Class 10 / 6100 / 7200 / T4 / T5) |
Frequently Asked Questions
These were designed to be cut out of 4130 chromoly steel, so run them on your plasma, laser, or waterjet from 4130 to match the design.
Yep, these were designed specifically for a 2" hollow snout and Wilwood brakes, so that's the setup they're built around.
Yes, this is a digital download — after payment you get the DXF cut files to have cut on a plasma, laser, or waterjet. If you need a shop to cut them, email us and we'll point you to one.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Class 1 buggy spindle is $65.00.
This Class 1 buggy spindle is brought to you by Www Cjdracing. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Race/Play Chassis Components plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Race/Play Chassis Components category, or shoot us an email and we will point you to the right files for your build.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
Reviews
No reviews yet.
