4" Housing 4130 Billet Lower Link Mount Pair
Shipping available to U.S. addresses only.
These lower link mounts are designed for pre-runner/race trucks with 1.25" rod ends and 3/4" bolt spacers that are 3”-3.065" in width. They are sold in a set with 4 billet 4130 mounts and 4130 plates for boxing in the mount to the housing tube. They can be mounted under the housing or in front of the housing for various applications. This is a physical product; you will be shipped the link mounts in a USPS flat rate box.
Shipping available to U.S. addresses only.
Frequently Asked Questions
These are weld-on link mounts made to sit on a 4" housing tube. You'll weld them straight to the housing once you've got them clocked where you want them.
Right now shipping is only available to U.S. addresses. Shoot us an email if you're outside the U.S. and we'll see what we can work out.
This is sold as a pair, so you get two billet 4130 lower link mounts — enough to do both sides of the housing.
The 4" Housing 4130 Billet Lower Link Mount Pair is $250.00.
This 4" Housing 4130 Billet Lower Link Mount Pair is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Billet 4130 Link Mount Tabs from JEHC INC plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Billet 4130 Link Mount Tabs from JEHC INC category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fabrication / Hard Parts, including Billet 4130 Link Mount Tabs from JEHC INC, all designed by working fab shops. Browse the Fabrication / Hard Parts section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.