31.5" length Plasma Table Friendly Sway Bar Arm
Frequently Asked Questions
These are designed to accept standard off-the-shelf broached machined ends for either 1.25 or 1.5" sway bars, so the same arm covers both setups. You just match it up with whichever broached end you're running.
These are plasma table friendly, so you cut the plates flat on your CNC plasma, laser, or waterjet and then press bend them to form the arm. They're set up to be cut and bent before you weld your build together.
This is a digital asset, so you're getting the DXF cutting files only, not a physical part. You take those files and have the plates cut and bent on a plasma, laser, or waterjet, and if you need a shop recommendation just email us.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 31.5" length Plasma Table Friendly Sway Bar Arm is $9.00.
This 31.5" length Plasma Table Friendly Sway Bar Arm is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Plasma Table Friendly Fabricated Sway Bar Arms from Tekk. plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Plasma Table Friendly Fabricated Sway Bar Arms from Tekk. category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including Plasma Table Friendly Fabricated Sway Bar Arms from Tekk., all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.