101-JLF-102-6-18.64-30
Specifications
| Platform | Universal / platform-agnostic |
|---|---|
| Part Family | Weld Washers (round + teardrop, weld-in bung) |
Frequently Asked Questions
These are DXF cut files for parts you'd typically cut and weld into your build. If you're not sure how this one installs for your setup, shoot us an email and we'll get you the details from the shop that designed it.
Yep, this is a digital download — you get the DXF cut files after payment, nothing physical ships. Take them to a CNC plasma, laser, or waterjet to have them cut, then bend and weld as needed for your build.
Material thickness isn't listed here, so email us and we'll check with the designer to make sure you cut these from the right stock for your application. We can also recommend a shop to run them if you don't have your own table.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 101-JLF-102-6-18.64-30 is $2.00.
This 101-JLF-102-6-18.64-30 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
