1.5" Round Tube Miter Joint Plates Pack

This pack is cut specifically for 1.5" round tube. If you're running a different tube diameter, shoot us an email and we'll see if there's another file pack that fits your build.

You get miter plates from 60 to 120 degrees in 5 degree steps, and each angle is sized for 1/8", 3/32", and 1/16" wall tube. That's 39 separate cut-files total so you can match whatever joint and wall you're working with.

They're DXF cut-files you download right after payment, so yeah, drop them straight onto your plasma, laser, or waterjet and cut away. If you don't have a table, email us and we'll point you to a shop that can cut them for you.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 1.5" Round Tube Miter Joint Plates Pack is $12.00.

This 1.5" Round Tube Miter Joint Plates Pack is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Tube Miter Joint Plates Packets plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Tube Miter Joint Plates Packets category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Tabs, Gussets, and Brackets, including Tube Miter Joint Plates Packets, all designed by working fab shops. Browse the Tabs, Gussets, and Brackets section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.