Universal 1" Uni-Ball Beam - Fullsize 91" Trackwidth - PTF
These Universal Adjustable Camber Beams are designed for a “Fullsize” track width with the Universal JEHC Uprights for roughly an 91″ overall. These beams are easy to assemble and cut on a plasma table, they fit a 4’x4′ table and utilize straight tube sections for ease of fabrication.
Designed with 1.25″ rod ends and a 1" uni-ball bearing for the lower upright mount these beams are built for serious applications. Stronger than the similar rod end beams these are a little more complicated to fabricate and designed for heavier vehicles.
***This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
Plasma Table Friendly – This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.
More Information
| Seller | TEKK Consulting |
|---|
Specifications
| Platform | Universal / platform-agnostic |
|---|---|
| Part Family | Universal I-Beams / Twin I-Beam (TTB) Beams |
| Position | Front suspension |
| Build System | I-beam / Twin I-Beam (TTB) |
Frequently Asked Questions
These are Plasma Table Friendly, so it's all flat plate with no bends to deal with. They use straight tube sections too, so it's pretty straightforward to fabricate as long as you follow the WPO steps to keep the strength.
Yep, they're designed to fit a 4'x4' table so you should be good to go. They're laid out to make the cutting and assembly easy for anyone running a 4x4 setup.
These are built for serious, heavier applications since they run a 1" uni-ball bearing at the lower upright mount plus 1.25" rod ends, making them stronger than the similar rod end beams. They're a little more complicated to fab, but that's the tradeoff for the extra strength on heavier vehicles.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Universal 1" Uni-Ball Beam - Fullsize 91" Trackwidth - PTF is $92.00.
This Universal 1" Uni-Ball Beam - Fullsize 91" Trackwidth - PTF is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Uncategorized plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Uncategorized category, or shoot us an email and we will point you to the right files for your build.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
Reviews
No reviews yet.
