Deuling Design 12 Position Air Tool Rack
***These products are Digital Assets. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
| Seller | DeulingDesign |
|---|
Frequently Asked Questions
It's a digital download — you're buying the DXF cut file, not a finished rack. Run it on your plasma, laser, or waterjet, then bend it on a press and you're good to go.
It's designed to be bent out of either 16 gauge aluminum or steel, so cut from whichever you'd rather run in your shop.
It holds up to 12 air tools, and they hang by the fitting. After you cut and bend the plate you've got 12 spots ready to load up.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Deuling Design 12 Position Air Tool Rack is $7.00.
This Deuling Design 12 Position Air Tool Rack is brought to you by Deuling Design. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models, Superioroffroaddesigns and Velocity Fab. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Shop Tools plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Shop Tools category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Fixture and Tools, including Shop Tools, all designed by working fab shops. Browse the Fixture and Tools section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.