Bolt On Bronco Rear Drop Hanger for 2.5″ Spring Conversion – Plasma Table Friendly
If you are going to convert your rear spring setup to 2.5” springs this is the proper way to do it, not cheap “conversion spring spacers”.
***This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
Plasma Table Friendly - This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.
Specifications
| Platform | Ford Bronco |
|---|---|
| Part Family | Leaf Spring Hangers |
| Position | Rear suspension |
| Build System | Leaf spring / spring-under |
Frequently Asked Questions
These are designed for the 1980-96 Bronco and bolt directly in place of the stock hanger. If you've got a Bronco outside that range, shoot us an email and we'll see if there's a file that works for your build.
They're plasma table friendly, meaning no bends — all flat plate, so it's easy to cut and assemble. Just follow the WPO (weld procedure) steps so you keep the strength in the part.
These are conversion hangers built for 2.5" springs and 2.5" shackles running 6.5-7.5" in length. They drop the shackle location down to complement those longer shackles — it's the proper way to convert instead of using cheap spring spacers.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The Bolt On Bronco Rear Drop Hanger for 2.5″ Spring Conversion – Plasma Table Friendly is $18.00.
This Bolt On Bronco Rear Drop Hanger for 2.5″ Spring Conversion – Plasma Table Friendly is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Leaf Spring Hangers plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Leaf Spring Hangers category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Leaf Spring Components, including Leaf Spring Hangers, all designed by working fab shops. Browse the Leaf Spring Components section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.
