80mm Tube Lower Link Mount for 3/4" bolt and 3.065" spacers or narrower.

These are set up for the 80mm diameter housing found on both the Jeep JL Rubicon and the Gladiator, so you're good either way. Just confirm your housing measures 80mm before you cut.

These are plasma table friendly with no bends — all flat plate, so they're easy to cut and assemble. Just make sure you follow the WPO during assembly to keep the strength in the component.

Yep, these are designed for 1.25" rod ends running a 3/4" bolt, with tab spacing set for 3.065" spacers or narrower. If you're running something wider or a different bolt size, shoot us an email and we'll see if another file works for your build.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 80mm Tube Lower Link Mount for 3/4" bolt and 3.065" spacers or narrower. is $9.00.

This 80mm Tube Lower Link Mount for 3/4" bolt and 3.065" spacers or narrower. is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Straight (0 Deg.) "Front Mount" Lower Link Mounts plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Straight (0 Deg.) "Front Mount" Lower Link Mounts category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Lower Link Arm Housing Mounts, including Straight (0 Deg.) "Front Mount" Lower Link Mounts, all designed by working fab shops. Browse the Lower Link Arm Housing Mounts section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.