2.5" Spring and 3" Housing Spring Perch - PTF
**This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.**
Plasma Table Friendly - This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.
**This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.**
Plasma Table Friendly - This means that the component is designed with no bends, all flat plate. This makes the cutting and assembly very easy for anyone with a plasma table. Specific steps are required (follow the WPO) to ensure the strength is kept with this component.
| Seller | JEH Consulting INC |
|---|
Frequently Asked Questions
These are cut to weld onto a 3" housing and run a 2.5" spring. If you're on a different tube size, shoot us an email and we'll see if we have a file that matches your setup.
These are plasma table friendly, so they're all flat plate with no bends. The plates tab together for easy assembly, just follow the WPO so you keep the strength when you weld them up.
You're getting the DXF cutting files only, not a physical part. Run them on your CNC plasma, laser, or waterjet, then weld the plates onto your housing per the WPO.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 2.5" Spring and 3" Housing Spring Perch - PTF is $5.00.
This 2.5" Spring and 3" Housing Spring Perch - PTF is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for 7" Wide 2.5" and 3" Spring Flat Plate Perches from TEKK Consulting LLC plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 7" Wide 2.5" and 3" Spring Flat Plate Perches from TEKK Consulting LLC category, or shoot us an email and we will point you to the right files for your build.
Yeah — DIY Off Road carries downloadable DXF cut files across Spring Perches, including 7" Wide 2.5" and 3" Spring Flat Plate Perches from TEKK Consulting LLC, all designed by working fab shops. Browse the Spring Perches section or email us and we will help you track down the right files.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.