105-JLF-001-1.25-3.5-110

These are notch guides for 1.25" round tubing, made to be 3D printed rather than cut on a plasma or laser table. You print it, clamp it to your tube, and use it to mark your notch angle before cutting.

This one is set up specifically for 1.25" round tubing, so it won't size right on anything bigger or smaller. Shoot us an email and we'll see if another guide in the lineup matches the tube you're running.

The angle and tube specs are built into this specific file from Tekk Consulting, so it's dialed for one setup. If you need a different angle for your chassis, email us and we'll point you to the right file or get you connected with the designer for a custom one.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 105-JLF-001-1.25-3.5-110 is $4.00.

This 105-JLF-001-1.25-3.5-110 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 1.25" Round Tubing plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 1.25" Round Tubing category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Printed "Potato Chip" Notch Guides, including 1.25" Round Tubing, all designed by working fab shops. Browse the 3D Printed "Potato Chip" Notch Guides section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.