101-JLF-102-12-45.5-40

$2.00

In stock

More Information

More Information
Seller	Jason Heard

Specifications

Platform	Universal / platform-agnostic
Part Family	Weld Washers (round + teardrop, weld-in bung)

Frequently Asked Questions

What steel thickness should I cut these from to run them on my plasma table?

These come as DXF files so you can cut them on plasma, laser, or waterjet, but we don't have a specific material thickness listed for this one. Shoot us an email and we'll get you the recommended gauge from the designer before you cut.

Do these weld in or do I need to bend them first?

These are downloadable DXF cut files, so once you have them cut you'd fab and weld them into your build like any other part. If there's any bending involved for this piece, email us and we'll confirm with the shop that designed it.

What exactly do I get after I pay, an actual part or just the files?

You get downloadable DXF cutting files only, no physical part ships. After payment you download the files and have them cut on a CNC plasma, laser, or waterjet, and if you need a shop to cut them email us for a recommendation.

How do I get the 101-JLF-102-12-45.5-40 after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the 101-JLF-102-12-45.5-40 cost?

The 101-JLF-102-12-45.5-40 is $2.00.

Who designs the 101-JLF-102-12-45.5-40?

This 101-JLF-102-12-45.5-40 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.