Tekk Standard 24" Sway Bar

Are these files just the sway bar arm plates, or does the whole bar assembly come too?

You're buying the DXF cut files for the fabricated sway bar arm plates only. You'll have them cut on a plasma, laser, or waterjet, then press bend and weld up the assembly yourself.

Do any of these plates need to be bent, or can I just cut them flat and weld?

These are designed to be cut flat and then bent on a press, so plan on having access to a press brake to finish them. If you don't have one, email us and we can recommend a shop to cut and bend them for you.

What thickness steel should I run these on my plasma table?

The files are set up flat for cutting on plasma, laser, or waterjet, but we don't have a specific material thickness called out here. Shoot us an email and we'll point you in the right direction for your build.

How do I get the Tekk Standard 24" Sway Bar after I buy it?

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

How much does the Tekk Standard 24" Sway Bar cost?

The Tekk Standard 24" Sway Bar is $9.00.

Who designs the Tekk Standard 24" Sway Bar?

This Tekk Standard 24" Sway Bar is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

Where can I get cut files for Plasma Table Friendly Fabricated Sway Bar Arms from Tekk.?

DIY Off Road has downloadable DXF cut files for Plasma Table Friendly Fabricated Sway Bar Arms from Tekk. plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Plasma Table Friendly Fabricated Sway Bar Arms from Tekk. category, or shoot us an email and we will point you to the right files for your build.

Do you have Sway Bar Arms cut files for an off-road or race build?

Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including Plasma Table Friendly Fabricated Sway Bar Arms from Tekk., all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.

Can you point me to a shop to get these cut and bent?

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

How do I get the files, and what do I do with them?

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Do I need to know how to weld and fab to use these?

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.

Tekk Standard 24" Sway Bar

Frequently Asked Questions