11" Race Sway Bar

These are DXF cut files only, not a physical part. You'll get the files to run on a CNC plasma, laser, or waterjet, then bend the plates on a press and weld up your arm.

The download gives you the DXF geometry, but the material and thickness call is up to you based on your build. If you're not sure what to run, shoot us an email and we can point you to a shop that can cut and bend these right.

These plates are designed to be cut and then press-bent, so they're not flat weld-in pieces. If you don't have a press, email us and we can recommend a shop to cut and bend them for you.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 11" Race Sway Bar is $23.00.

This 11" Race Sway Bar is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for Light and Simple Race Sway Bar Arms From Tekk plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Light and Simple Race Sway Bar Arms From Tekk category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across Sway Bar Arms, including Light and Simple Race Sway Bar Arms From Tekk, all designed by working fab shops. Browse the Sway Bar Arms section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.