36"x84" Fixture Table with 3x3 bolt pattern. Holes can use a 5/16 through bolt or be threaded to 3/8-16. 36" tall with leveling feet.
***This product is a Digital Asset. You are purchasing the cutting files (DXF) for this component so that you can have these plates cut and bent (press) from a CNC plasma, laser, or waterjet machine.***
| Seller | armada-engineering.com |
|---|
Frequently Asked Questions
The files give you the cut geometry, but they don't lock you into a specific thickness — pick a plate gauge that suits the load you're putting on it. If you're not sure what works best for a fixture table this size, email us and we can point you in the right direction.
This is the full 36"x84" fixture table design with the 3x3 hole bolt pattern and it's set up to sit 36" tall with leveling feet. You're getting the DXF cut files for the components, so you'll need to have them cut, press-bent where needed, and weld it together yourself.
Yep, the holes are designed to take a 5/16 through bolt or be threaded to 3/8-16, so you can tap them after cutting if you want threaded holes. Run the DXFs on your plasma, laser, or waterjet, bend what needs bending, and finish them however suits your setup.
These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.
The 36"x84" Fixture Table is $100.00.
This 36"x84" Fixture Table is brought to you by Armada Engineering. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models, Superioroffroaddesigns and Velocity Fab. Need a custom part designed? Email us and we will connect you with the right designer.
DIY Off Road has downloadable DXF cut files for Fixture and Tools plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the Fixture and Tools category, or shoot us an email and we will point you to the right files for your build.
Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.
Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.
Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.