105-JLF-001-1.25-5.5-105

This one's a 3D printed potato chip notch guide, so you'd print it rather than cut it out on a plasma or waterjet. Most of our other products are DXF cut files, but this guide is meant to be printed and used to mark your tube notches.

This guide is set up for 1.25" round tubing. If you're running a different tube size, shoot us an email and we'll point you to the right guide for your build.

Yep — these are designed by the shop Tekk Consulting Inc here in the marketplace, and we can connect you with the designer for custom work. Just email us with what your build needs and we'll get you set up.

These are digital — soon as your payment goes through you get a download link for the DXF cut files. Nothing physical ships.

The 105-JLF-001-1.25-5.5-105 is $4.00.

This 105-JLF-001-1.25-5.5-105 is brought to you by Tekk Consulting Inc. Other off-road and race fabrication designers in the DIY Off Road marketplace include All Co Metal Fab, Armada Engineering, Baja Customs, Baker Motorsports, BPforged, Brad Howard Welding and Fabrication, Christopher Reader, CRD, Deuling Design, Dirty BFabwerx, FDFabrication, Izzy Fab, JEH Consulting INC, JRTfab, Master Fab, Mc Will Manufacturing, OffroadCAD-Models and Superioroffroaddesigns. Need a custom part designed? Email us and we will connect you with the right designer.

DIY Off Road has downloadable DXF cut files for 1.25" Round Tubing plus a ton of other off-road and race fabrication parts, all drawn up by real fab shops. Browse the 1.25" Round Tubing category, or shoot us an email and we will point you to the right files for your build.

Yeah — DIY Off Road carries downloadable DXF cut files across 3D Printed "Potato Chip" Notch Guides, including 1.25" Round Tubing, all designed by working fab shops. Browse the 3D Printed "Potato Chip" Notch Guides section or email us and we will help you track down the right files.

Yeah — if you don't have your own CNC plasma, laser, or waterjet, shoot us an email and we'll send over a few shops that can cut (and press/bend) the parts so you can weld them up.

Soon as your payment goes through you get a download link for the DXF cut files. You (or a shop) cut them from steel on a plasma, laser, or waterjet, bend whatever needs it, then weld them into your build. Nothing physical ships.

Yep — these are cut files for DIY and pro fabrication. A lot of the parts are "plasma table friendly" (flat plate, no bends) to make cutting and assembly easier, but you'll need to cut and weld them in yourself, or have a shop handle it.